Soya Lecithin Process Flow Chart
Leave a message
Soy Lecithin Liquid is an organic compound with the appearance of Light Brown Liquid, the molecular formula is C42H80NO8P.
Lecithin series products are extracted from soybean oil by new technique and process. It is a kind of safety food additive as emulsifier, thickener, stabilizer, preservative.
New Ambition Chemical provide high quality Soy Lecithin with best price. Please contact us for inquiry.
|
Raw material |
Crude Soya lecithin |
|
Crafting process |
Description
|
|
1: Raw Material
|
Crude Soya lecithin are transported into the raw material tank after being transported into the plant by tanker. |
|
2: Filter
|
Filter impurities in the raw material through a filter. |
|
3: Tempering |
The raw materials and auxiliary materials are added to the reaction tank according to the ratio, and the temperature is controlled at 55~65 °C. The quenched and tempered materials are pumped into the thin film evaporator. |
| 4: Concentrate |
Start the vacuum pump, adjust the pressure of the thin film evaporator to -0.09~-0.1Mpa, the temperature is 105~130°C, start the feed of the material pump, adjust the opening of the valve to the balance of the feed on both sides, observe the foam content of the material through the barrel, and the material is qualified. Then enter the recovery tank, otherwise continue to concentrate, remove excess water through a film dryer, and concentrate for 4 to 5 hours. |
| 5: Temporary storage |
The concentrated material is cooled by a cooling device below the thin film evaporator, and is temporarily stored in the finished product tank. |
| 6: Filling |
The material is pumped into the filling chamber by the pump for quantitative filling. |
| 7: Storage |
The qualified products after packaging enter the finished product warehouse, 30cm away from the wall, the classification and positioning code are placed, and there is a clear distinction between the signs. |
